The tile saw you just bought a week ago for cutting granite and porcelain stopped working!!
You need the tile saw most, but it doesn’t produce the precise cut for your renovating project. So, you start blaming the entire unit and want to throw it into the dustbin. What else do you do with it when it doesn’t serve you? Wait a bit!
Be cool! It’s not the fault of the saw itself. Instead, it’s the blade that is responsible for the low-quality cuts.
Most of the manufacturers end up their production by including a cheap blade to cut down their budget. Super Thin Diamond Ceramic Saw Blade is the best & budget-friendly of the blades reviewed below [we recommended]
The blades they included are not only cheap but also have a short span of life. Due to the poor quality blades, it puts stress on the motor and overheats the entire unit.
To get rid of these issues, changing the blade will be more viable. And in this roundup guide, we enlisted some of the best tile saw blades in the market.
So, let’s dive into this guide.
Our Top Picks
- Our Top Picks
- 10 Best Tile Saw blades Reviews
- #1.DEWALT 7″ Porcelain Wet Tile Saw Blades
- #2.MK Diamond Tile Saw Blade for Cutting Glass
- #3.GoYonder 4.5 Inch Porcelain Tile Blade
- #4.DEWALT 10 Inch Tile Saw Blades
- #5.SKIL 7 inch Diamond Blade for Grinder & Circular Saw
- #6.QEP 7-Inch Glass Tile Saw Blades
- #7.GoYonder Super Thin Diamond Ceramic Tile Saw Blades
- #8.MK Diamond 7 Inch Tile Saw Blades
- #9.QEP Wet Tile Saw Diamond Blades for Porcelain
- #10.DEWALT 8 inch Tile Saw Blades
- Buying Guide For The Best Tile Saw Blades
10 Best Tile Saw blades Reviews
We have discussed in detail [Features, Specifications, uses] the top 10 best tile saw blades for you by researching many products. Hopefully, after reading this review you will be able to decide to buy your desired blade.
The DEWALT Diamond Blade for Porcelain Tiles, with its continuous rim design, is the best blade for cutting ceramic tile. It has an extended performance diamond matrix coating on the edges, giving you a prolonged cutting experience. If you need quick straight cuts on your tile ceramics, the Delta Diamond Blade always does its magic. The blades have laser-cut expansion slots, which obviates all sorts of heat build-ups.
You can attach the blade with an angle grinder and make precise cuts on the go. The sharpness of the blade pops vividly in its smooth chipless cuts. Turns out, you will need little to no water drops to maintain a regular workflow. Sure enough, you will have clean edges up to 24 inches on any wood-like plank tiles.
The only drawback to the blade is its fine chips, causing a cloud of dust while working. You can wear protective gear for extra protection and pour water drops to prevent any chip dust.
The MK Diamond 156651, with its diamond grade blade, slices and dices any material, having an amorphous surface. If you are a fused glass artist, this saw churns out the best patterns. You can pair this blade with a low-end, getting a subtle finish in all even and uneven surfaces. The edge has a metal-bonded diamond design, giving you excellent glass cuts.
The blade offers you to cut glass mosaic tile, which is excellent for a quick and smooth back-splash. The premium-grade metal bond edges give the blade stability and chipless ceramic boundaries. Having a thin diameter, the saw blade can also gash broken glass, leaving minor chips in the process. When you need professional results on your glass or porcelain tiles, the blade will let you go as fast as you want.
You don’t need to use water drops, as the blade has a heat-absorbing mechanism. The only downside to it is the price, which is not a big deal if you crave a long-lasting blade for your projects. You can use the blade on marble floor tiles and other hard materials with a flawless result guarantee.
GoYonder 4.5 Inch blade is the best Porcelain Tile Blade. Trying to cut granite, ceramic, antique brick, and even concrete with just one 4.5 Inch super blade? Turns out, the GoYonder 4.5 Inch Super Thin Diamond Saw slices clean through all the materials, using its universal cuttings. The saw blade has shape edges and an X teeth design, offering you the smoothest cuts possible in your work.
If you happen to work on ceramic tiles, the GoYonder 4.5 inch will always provide a chip-free experience. The best part is, you don’t have to use water to give your material a top-of-the-notch finish. The saw blade edges function a lot like a laser cutter, slicing through your workpiece like butter. Weighing just above 1.9 ounces, the blade reduces the pressure on your machine and makes carrying it easy.
Having a thickness of 1.2 millimeters, the saw blade can also gash through metal sheets and wire bundles. The saw blade will always give you an A-Class treatment, cutting dry and wet cuts with a perfect vibe. However, the saw blades shed dust everywhere, making safety glasses a necessity. The blades have a friction-reducing mechanism, making broken edges a thing of the past.
The DEWALT Diamond Blade for Tile has a continuous rim design, cutting all amorphous materials with zero chippings. It has a diamond matrix, giving its extended performance and long-lasting usage. The blade permits you to cut all types of tiles and other enhanced materials with a chip-free experience. You can ramp over porcelain or mosaic tiles without any cracks on the blade or material chippings.
The XP2 and XP4 blades are also heat-resistant, decreasing the decay of the blade while working. The blades have rigid edges, which allow quick and straight cuttings in high-power tile saws. There are laser-cut expansion slots on the blade, making the best cuts even in high heat build-ups. The blade is rigid, giving you a bendless experience and no flex when cutting at angles. It has a 5/8-inch arbor, allowing you to utilize the particular design for blade monitoring.
If you switch to these XP2 and XP4 blades, you will get smoother cuts, no chippings, and top-notch results on all porcelain tiles. Then again, you need to dress the blade from time to time to keep the diamond quality consistent. In the end, the only drawback of the blade is the minor dust clogging in the blade cutout.
The SKIL 79510C 7-Inch Turbo Rim Diamond Blade is the best Tile blade for a grinder blade, having a strong and durable cutting edge. You will like it, particularly if you have a circular saw or a grinder for your projects. Similar to many mid-range grinder blades, the SKIL 79510C offers a high performance, all at half of the price. For many users, the saw blade gives them a legendary performance and lasts longer than abrasive wheels.
Weighing just a few ounces, the blade somewhat feels light on the tough while working. It has a stainless steel outer layer, lasting for multiple straight projects. A 7-inch turbo rim diamond design aid in deeper cuts and longer service life. Blade chippings are not always seen while using the blade, as the chips are often smaller than dust itself. So, you should wear a mask and other protective gear to prevent the dust from getting sucked into your lungs.
Though the blade takes a little time, cutting masonry tiles, you should not worry about the final quality. The cuts are quite subtle and have minor chippings in the edge as compared to other blades of similar quality. Granite cuts like butter for hours, and you can still use the blade for other projects you might have.
The QEP 6-7006GLQ 7-Inch saw blade has a continuous rim glass tile diamond design, which cuts perfectly on any material you have. It can reach a cutting speed of more than 8500 RPM without decreasing the quality of work. The blade offers a 5/8 in. arbor, helping you fix it in all major brands of wet tile saw. The blade has a full steel framework, allowing the blade to last for longer.
A 7 mm diamond-coated cutting edge helps improve edge cuts, making them look flabbergasting. The blades are so rigid, and you can cut glass tiles without shattering them or edge chippings. If you want to use the blades dry, there you can get a drop in the cut quality. Adding drops of water to the cutting surface reduces high vibration or uneven chips, giving you a photo-perfect finish.
The blades will do their job without breaking the bank or your life savings. In fact, the strong edge of the blade holds up perfectly, allowing you to save a little cash, not buying extras. The blades have a craving for glass tiles, but you use them on ceramic, porcelain, mosaic, etc. as well.
If you saw multiple porcelain tile saw blade reviews, the 4″ D105mm is most probably the cheapest of them all. Its multi-functional blade cuts clean into porcelain, ceramic tile, granite, etc., wet or dry. The saw blade has shape edges combined with X-teeth, offering you faster and smoother cuts. At this price, the 4″ D105mm provides the most features, keeping a cool vibe in the end.
Once you match the blade with your saw machine, there is no stopping this beast even in the driest conditions. It has a super-thin mesh rim, providing you with faster cuts and longer service life. The X-teeth design of the blade helps smooth out the scratches, preventing vibrations and dust spread. Now you don’t have to take a headache for the edge chipping, which may happen on your masonry materials.
Though the blade can survive in both wet and dry cutting space, applying water makes the cuts even and the temperature low. Dropping a few drops of water can also decrease the friction of the blade and make even cuts. Once you wear all the safety gear, you can use the blade like a butter knife for your ceramics.
The MK Diamond 158434 7″ has an exquisite design, rigid edges, and is excellent for porcelain and all hard vitreous tiles. It has a thin rim structure, preventing chipping while working. When you need a durable blade with the added benefit of friction control, the MK Diamond 7 inch is the way to go. Turns out, you don’t need to force cut the material due to its cutting efficiency.
Blade wobble can irritate you with edge chippings and uneven cuts. However, this 7″ porcelain tile saw blade has tension slots, preventing all dishing and blade wobble. The tension slots of the blade also make cuts precise and improve safety while working. You just need to keep the blades saturated with water and see just what the beast has stored for you.
Compared to other blades that are prone to chip tiles, MK’s best blade to cut tile porcelain is the MK Diamond 158434. The diamond blades hold a decent edge on the slate, limestone, granite, marble, and similar materials. But don’t use it on non-masonry materials, as the edge quality may degrade faster.
The QEP 6-1008BW has the best 10-inch wet saw blade for porcelain tile. Its saw blade churns out some astonishing results thanks to its premium-grade build quality. A thin-rim diamond edge gives the blade an extra edge while cutting porcelain, ceramic, or marble tile. The high-quality steel blade has an edge protection feature, allowing you to reduce edge chippings. When you are a professional, and you need proficiency in your work, the blade is a game-changer, indeed.
The blade, with its shock absorption mechanism, prevents wobbles and uneven edge cuts. You can use the blade dry or add a few drops of water and prevent friction from ruining your work. Using drops of water keeps the blade cooler, increases its service days. You can easily slice through hard nephrite jade, agate, or even jasper, without damaging the blade quality.
Having an arbor of 5/8 allows the blade to fit in almost any wet tile saw you have. The best part is, the blade can withstand more than 6000 RPM, which is just mind-boggling. This saw blade also has micro-segments, helping you prevent blade or material edge chippings. Overall, the QEP 6-1008BW is the best blade for cutting ceramic tile and other hard masonry tiles at this budget range.
The DEWALT Tile Blade offers the best-wet saw blade for porcelain tile and other masonry materials. Looking close, you will see the fine diamond matrix, providing frictionless cuts.
The blades have sharp exterior edges and can last for days to come. Even after 20-30 repetitive cuts, the rigid edges stay strong, leaving minor catchings.
The blades perform flawlessly in all workspaces, and you don’t need to buy multiple saw blades for your projects. If you own a high-power tile saw, the Dewalt 8-inch enhances your cutting proficiency, allowing quicker cuts. Turns out the low heat absorption feature of the blades improves the cutting quality and leaves you with a photogenic finish. The blades also have wobble restrictions, preventing all totting during angled or straight cuts.
When you use thick masonry materials, the blades may chip and cause eye damage. Due to this, you should wear protective gear and glasses in particular as a primary precaution. Your blades will last longer when you use softer masonry materials and no blade erosion for days to come. Furthermore, you will get 30 days return policy for the blade if something wrong pops up.
See More Reviews:-Best Contractor tile saw
Buying Guide For The Best Tile Saw Blades
Saw blades aid you to improve cutting and trimming, saving you tons of time in your project work. But before you start scrolling the internet for the right saw blade, know the things in front of the book first. Let us go through the following steps before finding the best saw blade for the projects.
The type of project you do will determine the general purpose of the blade. A saw blade meant for cutting hardwood will vary in the blade, which can only cut marbles and so on. If you are a wood trimmer, any good old circular saw will do the trick. Porcelain stoneware, tiles, or any other masonry tiles due to their ceramic structure need a diamond-coated cutting wheel. The manufactures of the saw wheel blade will let you know everything you need and the user intends in papers.
Type of Saw Blades
Many types of saw blades exist in the market, starting from the all-purpose blade to the turbo-rim blade for bricks and concrete. A stacked dado kit blade helps make grooves in wooden materials, including notches, rabbets, and so on. There are also the ripping blade, Crosscut Blade, Continuous-rim blade, and the Turbo-Rim Blade.
A crosscut saw blade with its pointy teeth slices against the gains, avoiding all splintering and burning. With a diamond-coated cross-cut saw, you can cut masonry tiles, wood, and almost everything you have on hand.
A turbo-rim blade with its diamond-coated edges and serrated rim can cut materials like brick and concrete more efficiently. The blade has an aggressive design, offering clean cuts for both dry and wet applications.
A continuous-rim blade comes with a diamond-coated edge, enabling to work on tiles, slate, and all other ceramics. The blades have an actual diamond on the edges, making clean cuts every time it spins. Continuous-rim blades can work dry or wet, where the wet cuts produce the best results.
Woodworkers and carpenters always keep a ripping blade, using it for their wood cutting projects. The blade has flat teeth, making fine cutting slots for decorative splines and extra smooth edges. The blades help cut along the grain, producing in a flat-bottomed groove with a crisp.
Stacked Dado kit Blade
A stacked dado kit blade is often a choice for professional furniture designers. The blade with its sharp edges can make grooves in wood up to 3/4 in. wide. Having a flat bottom cut design, the blade churns out flabbergasting results for furniture, cabinet, and box joints.
When choosing a saw blade, you need to know the features of the blade too. The features are blade size, teeth count, durability, and arbor size.
The blade size will help you achieve heavy-duty projects without damaging the edges too much. But for small DIY projects, you can use a shorter blade and still have a flawless result. A blade size can be from 8 to 12 inches in diameter, and you need to check the blade compatibility with your saw first.
Pricing and Band Selection
An excellent old saw blade can range from the 20 dollar mark and up to 100 dollars or more. Low-budget saw blades can’t bear a heavy load, making them best suited to DIY projects only. A 50-60 dollar mid-range blade has extra edge durability, improving the quality of the cuts. Finally comes the premium grade blades, which offer everything out of the box. The blades cost more than 100 bucks and give you durability, fine cuts, and successful heavy-duty projects. These blades are more of a professional requirement than a regular DIY thing.
Now finding the top brands can also help, getting the perfect blade for your projects. Diablo, Graff, Dewalt, Freud, etc., produce the best quality saw blades at all price points.
What is the best blade to cut porcelain tile?
The best blade to cut porcelain tile is most probably a diamond blade with X-teeth or a rim design. Diamond blades offer you the sharpest blade edges, allowing a butter-like experience with the porcelain tile.
How long should a tile saw blade last?
The life span of a tile saw blade depends on the material you are working on and the blade quality. If you happen to use it on hard masonry tiles, the blade may last about 10-12 hours, depending on the blade quality.
Can I put a wood blade on my tile saw?
You can try adjusting a wood blade on the tile saw, but the results will not come satisfactory. Wood saw blade allows fine cuts only if you use it on a table saw.
Can you sharpen a tile saw blade?
Yes. You can try sharpening the tile saw blade with sandpaper or abrasive material. However, the results will not come nearly as close to the sharpness of a new tile saw blade.
Can diamond blade cut granite?
Granite is more rigid than ceramic or marble, so using a diamond blade to cut granite is not a great idea. In fact, the quality of the blade will degrade faster once you try using it on granite.
The best tile saw blades, due to their durable edges, last for longer in heavy workloads, avoiding uneven edges every time. If you want to cut glass tiles, porcelain, mosaic, or other natural stones, getting the best blade to cut tile is what you want. Tiles blades have diamond-coated edges, making them cut anything with minimal chippings.
So, no more today, and please put all your questions below; we will discuss them just for you. Have a good day.