As An Amazon Associate I Earn From Qualifying Purchases.

Can You Cut Metal With a Track Saw?

A track saw can cut through metal if the correct blade is attached. The blade must be designed specifically for cutting metal and the speed should be set low to avoid damaging the blade or over heating the metal.

  • Mark the metal where you want to make your cut
  • Set up your track saw according to the manufacturer’s instructions
  • Place the blade of the saw on the marked line and start cutting
  • Keep the blade perpendicular to the surface of the metal as you cut
  • Cut slowly and carefully to avoid damaging the saw or yourself
  • When you’re finished, turn off the track saw and unplug it from the power source
Can You Cut Metal With a Track Saw?


What Kind of Saw Do You Use to Cut Metal?

When it comes to cutting metal, there are a few different types of saws that can be used. The most common type of saw for cutting metal is an abrasive saw, which uses a rotating blade coated with abrasive particles to cut through the metal. There are also power shears and nibblers that can be used, although these are typically reserved for thinner metals.

For thicker metals, an oxy-acetylene torch can be used to make cuts, but this should only be done by someone with experience.

Can You Cut Metal With a Plunge Saw?

It’s possible to cut metal with a plunge saw, but it’s not the ideal tool for the job. Plunge saws are designed for cutting wood and other soft materials, so they don’t have the power or precision needed to cut through metal. If you’re determined to use a plunge saw for your metal-cutting needs, you’ll need to take extra care to avoid damaging the blade and create a clean, precise cut.

Can I Use My Circular Saw to Cut Metal?

If you’re planning on cutting metal with your circular saw, there are a few things you need to keep in mind. First, you’ll need to use a blade that’s designed for metal. These blades have fewer teeth than regular wood-cutting blades, which helps them cut through metal more easily.

You’ll also need to use a lower blade speed when cutting metal, as going too fast can cause the blade to overheat and break. Finally, be sure to apply firm, even pressure when cutting so that the blade doesn’t bind in the metal. If you follow these tips, you should be able to successfully cut metal with your circular saw.

What Cant a Track Saw Do?

A track saw is a versatile tool that can be used for a variety of tasks, from cutting through thick boards to making intricate cuts in thin material. However, there are a few things that a track saw cannot do. One of the most common uses for a track saw is cutting through lumber.

While it can easily handle boards up to 2 inches thick, it cannot cut through anything thicker than that. If you need to cut through thicker material, you will need to use a different type of saw. Another common use for a track saw is making rip cuts – cuts that are made along the length of the board.

However, because of the way they are designed,track saws cannot make cross cuts – cuts that are made across the width of the board. For this type of cut, you will need to use a different type of saw. Finally, track saws cannot be used to cut curves or circles.

They are only able to make straight cuts.

Cutting metal with a Circular Saw: Toolsday with Metal Saws

Metabo Metal Cutting Track Saw

Metal cutting track saws are one of the most versatile and powerful tools in a woodworker’s arsenal. They can be used to make quick, accurate cuts in a variety of materials, including hardwoods, softwoods, plywood, and even metal. Most track saws come with a built-in dust collection system that keeps the work area clean and free of debris.

This is especially important when working with materials like aluminum or stainless steel, which can create a lot of dust when cut. When shopping for a metal cutting track saw, it’s important to choose one that has a durable blade that can stand up to repeated use. You’ll also want to consider the depth of cut you need and the size of material you’ll be working with.

Metal cutting track saws are available in both corded and cordless models, so you can choose the one that best suits your needs.


A track saw can be a great tool for cutting metal, but there are a few things to keep in mind. First, the blade needs to be sharp and designed for cutting metal. Second, the speed of the saw should be set correctly – too slow and the metal will melt, too fast and the blade will overheat.

Finally, it’s important to use a steady hand and make sure the cut is straight. With these tips in mind, cutting metal with a track saw can be a quick and easy task.

Sharing Is Caring:

Hi! I'm James D. Miller, a professional pro woodworker, have 10 years of experience as a woodworker and 12 years of expertise as a saw user. I've revealed this power saw review site for you guys who have a genuine interest in power tools. Thanks for showing your affinity for the review blog. Find me on Twitter here. Happy reading.

Leave a Comment