Nextsaw is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you.

How To Clean a Tile Saw Blade With 1 Best Tip

Last Updated on 2 weeks by James D. Miller

The automatic saw can be the ultimate game-changer if it is equipped with a proper saw blade. A perfect blade will give you the satisfaction of cutting materials. It is quite easy to use. A reciprocal saw blade can put you under pressure if bought wisely and not cleaned. Producers do not reveal any bad aspects of their products.

So, before deciding to purchase, you have to find the most suitable Tile saw blade. Through many reviews and the purchase guide, you will learn that knowing all the ins and outs is crucial to buying the best tile saw blade. Not only do you get the job done right after you buy the tile blade, but you also pay more attention to its maintenance. Proper cleaning and care will serve you the same way for so long. So let’s not exaggerate and find out how to clean a tile blade.

How To Clean a Tile Saw Blade-Cleaning Process

To clean a tile saw blade, you have to go through some special procedures which are not very difficult. Get things done in a little while. This will give you ultimate good results in the long run.

An expensive but necessary tool for a professional installer, but with care and regular maintenance, many saws can serve year after year. As a result of prolonged use over time, the blades do not work properly. Since you understand that cleaning your saw blade is very important, let’s look at its step-by-step guide. It’s very simple, and you can do it yourself easily.

Step 1: Get Your Tools Ready

Before starting your cleaning process, you need to be sure to make the whole process a success that you have some necessary tools such as water, laundry detergent, plastic / soft wire (brass) bristle brush, and an aluminum pan.

Step 2: Remove Your Saw

First, fill the aluminum pan with water, then remove your tile saw from the whole setup. Then place the saw in an aluminum pan and make sure it is completely submerged. You can add some laundry detergent when it is completely submerged.

Step 3: Leave For A While

Then shake the added detergent and let it sit for 15 minutes until the whole process of cleaning the blade is completed. To do the job smoothly, you place your finger in the middle of the hole in the blade and move your finger in a circular motion. You can use a stick or a brush if you want.

Step 4: Scrub The Dirt Off

After 15 minutes, it’s time to rub your blade. Take a brush and start scrubbing the blade. However, be careful when scrubbing the blade so that you do not get hurt anywhere. Scrub until all dirt is removed.

Step 5: Rinse Your Blade

If the blade is properly scrubbed, you should wash it carefully. If you still notice stubborn dirt, re-soak it in water and follow the same procedure. Scrub even more before rinsing until completely shiny.

Step 6: Fully Dry Your Blade

Remember that once the cleaning process is complete, it must be dried very well. You must make sure that the blade is completely dry. You know that water, moisture, and steel are not friendly, so when they are combined, it results in erosion which is not what you expect.

Step 7: Fix The Blade Back In

Now it’s time to put the blade back in its original place. After installation, you can re-plug the saw into the power supply and turn on the blade to check to ensure it is working properly. Don’t think that your blade is not fragile. Like any other tool, maintenance is required to get very good results. You can follow a routine to clean your blade regularly.

Best Tips

It takes time to clean your tile blades. Carefully examine the tips of each tooth of the saw blade and make sure the blade is dry. If it is made of plain steel, it will not be prone to corrosion. If you notice that the sawtooth has been damaged, it is advisable to replace it.

Final Words

In addition to using tile saw blades, proper care should be taken to clean them. If you cannot get the right pitch, you do not want to be disappointed, so invest in a good capo. So design the best cleaning routine for the blades that will help improve its cutting, increase efficiency. These are undoubtedly great accompaniments to your important work that should be defended to the best of your ability.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top