1. Remove the bar and chain from the saw.
2. Unscrew the guide bar bolts and remove the guide bar.
3. Loosen the tensioning screw and take off the old chain.
4. Feed the new chain around the sprocket, then thread it through the guide bar slots.
5a. If you have a riveted master link: Push out one of the rivets with a punch, feed in the new link, then secure with a new rivet (use two if you’re worried about strength).
Tap them both in until they’re almost flush with the sideplate, then file or grind them down so they don’t protrude and snag on branches .
5b If you have a split master link: Hook it onto one side of the chain, then snap it closed around both sides ofthe other end ofthe chain (be sure to line up allthe drive lugs).
How To Put A Chain On A Chainsaw Properly
- Unplug the saw and make sure it’s turned off
- Raise the bar so that the chain is not touching anything
- Use a wrench or socket to loosen the bar clamp bolt and take the bar off of the saw
- Take the old chain off of the bar by hand, being careful not to touch any of the sharp teeth
- Find the right size and type of replacement chain, and put it on the bar, making sure that all of the teeth are pointing in the correct direction
- 6Put the bar back on the saw and tighten down the clamp bolt with your wrench or socket until it’s snug but not too tight – you don’t want to strip out this thread! 7Plug in your saw and give it a test run – if everything sounds good, you’re ready to get back to work!
Chainsaw Chain Replacement Direction
If you’re like most people, you probably don’t think much about the direction of your chainsaw chain when you’re replacing it. However, did you know that there is a right way and a wrong way to install a new chain? If you put the new chain on backwards, it can cause serious damage to your saw and potentially injure yourself.
So, what’s the correct way to replace your chainsaw chain?
The first thing you need to do is consult your saw’s owner’s manual. Every saw is different, so it’s important to follow the manufacturer’s instructions.
In general, though, you’ll want to start by loosening the bar nuts and removing the bar cover. Then, remove the old chain from the bar and sprocket. To do this, simply unthread the links from around the bar and sprocket.
Now it’s time to install the new chain. Again, consult your owner’s manual for specific instructions on how to do this. In general, though, you’ll thread the new chain around the sprocket first and then work it up onto the bar.
Make sure that all ofthe teeth are facing inwards (towards the center ofthe saw). Once you have everything threaded correctly, tighten down those bar nuts!
That’s all there is too it!
With just a little bit of care and attention, you can easily replace your own chainsaw chain at home.
Credit: www.instructables.com
How Do You Put a New Chain on a Chainsaw?
If your chainsaw chain is damaged or worn out, it’s important to replace it as soon as possible. A dull or damaged chain can cause the saw to kick back, which can be extremely dangerous. In this blog post, we’ll show you how to properly replace a chainsaw chain.
First, you’ll need to remove the old chain from the saw. To do this, start by removing the bar cover and locating the master link. The master link is a small metal connector that holds the two ends of the chain together.
Once you’ve found the master link, use a pair of pliers to disconnect it.
Next, pull the old chain off of the saw bar. If your saw has an automatic oiler, make sure to clean any built-up residue from around the sprocket nose before installing the new chain.
Now it’s time to install the new chain. Start by threading one end of the chain through the guide bar from underneath. Then connect the two ends of the new chain using the master link (make sure it’s facing inwards).
Do All Chainsaw Chains Fit All Chainsaws?
No, all chainsaw chains do not fit all chainsaws. Each chainsaw has its own specific bar and chain size, which means that only certain chains will fit on that particular saw. In addition, some saws use a different type of chain than others, so even if the sizes are compatible, the chain may not be compatible with the saw.
Always consult your saw’s manual to determine what size and type of chain it uses before purchasing a new one.
Is It Better to Sharpen Or Replace a Chainsaw Chain?
If you’re a chainsaw user, then you know that maintaining your saw and keeping it in good shape is important. Part of that maintenance is ensuring that the chain is sharp. But what’s the best way to keep your chain sharp?
Should you sharpen it or replace it?
The answer to that question depends on a few factors. Let’s take a look at when you should sharpen or replace your chainsaw chain.
Replacing Your Chainsaw Chain
There are a few instances when you should replace your chainsaw chain rather than trying to sharpen it. First, if the chain is damaged, then replacing it is usually the best option.
If the teeth are bent or broken, then they won’t cut as well and will likely cause kickback. Additionally, if the links are stretched out or warped, then they won’t fit properly on the bar and could come off while you’re using the saw. In these cases, replacing the entire chain is really the only option.
Another time when you might want to replace rather than sharpen your chain is if it’s become excessively worn. Over time, even with proper care and maintenance, chains will wear down and eventually need to be replaced. How often this needs to happen will depend on how often you use your saw and how hard you’re working it – but generally speaking, most people can get away with replacing their chains every couple of years or so.
Of course, if you notice that yourchain isn’t cutting as well as it used to (even after sharpening), then replacement might be necessary sooner rather than later. Trust your instincts – if something doesn’t feel right with your saw or its performance has diminished significantly, err on the side of caution and go ahead and replace the chain entirely..
How Do I Know What Chain to Replace on My Chainsaw?
If your chainsaw’s chain is damaged or wears down, you’ll need to replace it. But how do you know what chain to replace it with?
There are a few things to consider when choosing a replacement chain for your chainsaw.
First, you’ll need to know the pitch of your saw’s bar and chain. The pitch is the distance between any three consecutive rivets divided by two. Common pitches are .325″, 3/8″ and .404″.
You’ll also need to know the gauge of your saw’s bar and chain. The gauge is the width of the drive link, which is the part of the chain that fits into the groove of the bar. Common gauges are .050″, .058″ and .063″.
Finally, you’ll need to know the number of teeth on your saw’s cutting tooth and file size. The number of teeth will be stamped on the side of the cutting tooth, while the file size is usually stamped on top of it. Common file sizes are 5/32″, 3/16″ and 7/32″.
Once you have all this information, you can purchase a replacement chain that will fit your saw perfectly.
Conclusion
If your chain saw chain is damaged or dull, it’s time to replace it. Here’s how to do it:
1. Remove the old chain.
Use a wrench to loosen the nuts that hold the guide bar and chain in place. Then, remove the old chain and discard it.
2. Install the new chain.
Put the new chain around the guide bar, making sure that the teeth face the right direction. Then, use the wrench to tighten the nuts back in place.
3. Adjust the tension of the new chain.
Most chainsaws have an adjustable tensioner that can be used to tighten or loosen thenewchain as needed . Check your saw’s manual for specific instructions on how to do this .
4 Test outthe newsawchain bycuttinga few logsor piecesof wood .
