Nextsaw is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you.

How To Unlock Dewalt Miter Saw-[Step By Step Guide]

how to unlock Dewalt miter saw

Last Updated on 3 months by James D. Miller

A miter saw is an essential element to make any kind of furniture. Having a miter saw at home can ease many of the works during shaping the woods. But it is important to know how to unlock Dewalt miter saw to avoid any accident.

Top 4 Dewalt Miter Saw

[table id=7 /]

How To Unlock Dewalt Miter Saw DWS779? 

How To Unlock Dewalt Miter Saw DWS779?

Dewalt is the best company right now in the market to give you the perfect product range of saws. There is a particular saw named Dewalt dws779. This is a compound miter saw that comes with a slider. You will get a dust collector bag along with it.

Every Dewalt miter saw has a different system to unlock it. So, it is important to know how to use Dewalt miter saw to get the proper usability of the machine. This miter saw has a unique knob and grip to open and close. 

You might also be interested-Dewalt Miter Saw DWS779 VS DWS780-Check Out Which One’s Best?

You can follow the given methods to unlock dws779:

  • You can adjust most of the parts without any tools.
  • It is a slider-based saw, you have to unlock the slider at first and restrict it at the required angle.
  • Rotate the knob available on the slider and unlock the slider.
  • Take the pinout from the fence from both sides to unlock the fence to get the precision cut.
  • Unlock the head and blade to start with the operation. 
  • Work in a calm environment.

These are, particularly for dws779. For a general method, you may follow the next steps.

Every time you use a miter saw you need to unlock its different parts. Dewalt is a well-known company that makes the best miter saws. In this article, we will explore all the methods of unlocking a Dewalt miter saw.

Read More..

How to unlock Ryobi miter saw

How To Unlock Dewalt Miter Saw – Step By Step Guide.

One has to follow some proper guidance to unlock a miter saw. Understanding the correct unlocking methods can stop many serious accidents. So, knowing how to unlock a Dewalt miter saw directly from the makers is necessary. 

The process of unlocking a Dewalt miter saw is more or less the same for most of the Dewalt products. But there are some exceptions for each product. We will discuss the general techniques in this article.

There is the step by step solution for operating the miter saw. If you are a new user, it will not take more than minutes to open it. You need to follow the guidance given by the manufacturers. There are a knob and cam locker to operate the lock properly. 

The steps are the following:

Step 1: Unwind The Head

The very first and foremost thing you need to open is the head. When you see the miter saw from the very top of it, you will see that the head is locked with the whole body of the saw. To store the miter saw safely, you have to lock the head every time to keep it safe.

You need to unlock the knob at first. There is a knob available on the top of the head. You have to apply some pressure on the knob. The knob will open the machine easily.  

If you are using it for the first time, you will understand the process by the time you open it for the first time. There are pins within the knob. The pins will move and open the head for you. You can close the head by applying pressure on the knob in the same way as the opening.

Step 2: Push And Down Locks

There are two kinds of locks in a miter saw. One of them is the down lock. It is also called a knob. You have to give some pressure to the knob and it will unlock for you. Any Dewalt miter saw has this one feature. 

The down lock is very easy to open. This is an essential lock, as every miter saw will have this feature. Next comes the push lock. This is a special kind of lock confined with pins.

A very gentle push with your fingers will open the push-lock without much difficulty. It is also easy as the down lock.

Step 3: The Angle Lock

Most of the Dewalt miter saw in the market will have either the down or the push lock. But some of them might have the angle lock. It is the same as the previous locks but with an angle. It is required to know how to unlock an angled lock so that you can operate any miter saw.

Just put some soft pressure over the knob of the lock. It will open automatically. It is very easy and almost the same as the previous two locks.

Step 4: Knurled Lock

This step is very easy to perform and it takes very little time to do. In any Dewalt miter saw, there will be a knurled lock. Just rotate and press the knob to open and start working on your project.

Step 5: Bevel Lock

While giving the explanation of dws779, there was a term mentioned called the bevel lock. So, this is another part of the machine and you need to open this as well. If your machine has a fixed bevel, you need not unlock anything. But if it is tilted then you can do your work there.

With a tilted machine, you can move the machine to about 45 degrees. There is a slider and attached pin with the slider. You can open the pins from the slider and unlock the bevel lock. This is also easier to do.

Step 6: Base Unlocking

The very last step is to unlock the base. You must have a base attached to the saw and it is movable. To unlock the base look for a particular knob on the base. Press that and rotate it to open that up.

Once you unlock the base, the whole body including the arm will open up. It is quite important to know how to unlock a Dewalt miter saw arm. Once you are able to open the whole body of the miter saw including the arm, you can start working on your project.

These are the basic steps one needs to follow while unlocking the Dewalt miter saw.

Unlocking Tips Dewalt Miter Saw

  • You have to unplug all the electrical connections before starting to unlock all the separate parts.
  • There is a blade and many incidents happen with it during unlocking the machine. Make sure you are not touching the blade anyhow during the process. The blade is very sharp.
  • If you can not unlock any of the parts of it, search for the manufacturer’s guide or ask an expert.
  • Do not forget to wear all safety clothes before you start unlocking the parts.
  • Unlocking the parts needs mainly pressure. You have to maintain the accurate pressure on the knobs when you unlock any part of it.
  • Work in a calm and peaceful mind.

Dewalt Miter Saw Angle Lock

unlocking the Dewalt miter saw.

The angle lock is a special kind of lock that is explained before as well. This angle lock is a particular type of lock that will give you the way to tilt the machine. When you want to cut some critical angle of your wooden pieces, you need to tilt the machine.

Unlocking the angle lock is easier than any other locks in the machine. You need to put some gentle pressure on the knob and rotate it to open carefully. It will serve the purpose.

How to Unlock a Miter Saw – youtube

Frequently Asked Questions:

How do you adjust the blade on a Dewalt miter saw?

Adjusting the blade is as easy as unlocking the machine. Just rotate and slide the blade the way you want. Fix the knob at the place you want the blade to be fixed. It will be done

How do you unlock a Black and Decker miter saw?

Black and Decker’s miter saw have almost the same mechanism. You need to put some pressure on the given knob to rotate and open. It will unlock the machine.

How do you change the angle on a miter saw?

If your miter saw has a tilt angle, you can slide the head and set the angle for the project. You need to rotate the knob and head to set the angle.

Conclusion.

A miter saw is very important for you if you own a furniture shop or you want to make furniture on your own. It will serve multiple purposes once you know how to operate the machine properly.

Knowing how to unlock Dewalt miter saw will let you operate the machine properly and you will get the freedom of work. Start making your dream furniture from the scratch with the best Dewalt miter saw.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top