As An Amazon Associate I Earn From Qualifying Purchases.

How to Use Fiskars Chain Drive Extendable Pole Saw

Extend the saw by depressing the silver tab on the side of the orange pole. The tab will click when it is in the extended position. To retract the saw, press the tab again.

  • Open the chain drive extendable pole saw by loosening the thumb lock and extending the pole to your desired length
  • Place the saw blade on the end of the pole, ensuring that the teeth are pointing downwards
  • Lock the blade in place by tightening the knob at the end of the pole
  • Place your left hand on top of the pole, close to where it meets the blade, and your right hand lower down on the pole for support
  • Rest the tip of the blade on the branch you wish to cut and apply pressure to start cutting through it

Fiskars 16 foot Tree Pruner – Chain Drive Extendable Pole Saw – REVIEW

How Do You Use a Fiskars Pole Saw?

Assuming you would like tips on how to use a Fiskars pole saw: First and foremost, always read the instruction manual that comes with your Fiskars pole saw before using it. This will ensure that you are familiar with all of the proper safety procedures as well as how to operate the tool correctly.

When you are ready to use the pole saw, extend it to its full length and lock it into place. Then, position yourself so that you are comfortable and have a good grip on the tool. It is important to be aware of your surroundings and make sure that there is nothing nearby that could potentially get in the way or become entangled in thesaw blade.

Once you have a good grip on the pole saw and are confident in your surroundings, begin cutting through whatever material you are working with. Be sure to apply even pressure as you cut and avoid jerking motions, which could cause damage to both the material and the tool itself. When you are finished cutting, retract the blade back into its housing and lowerthe pole so that it is once again at its shortest length.

How Do You Use an Extendable Tree Saw?

If you need to cut branches that are high up or out of reach, an extendable tree saw is a helpful tool. Also known as a pole saw, this type of saw consists of a blade at the end of a long pole. The pole can be extended to different lengths, so you can choose the right one for the job at hand.

To use an extendable tree saw, start by extending the pole to the desired length. Then, place the blade on the branch you want to cut. For best results, try to make a horizontal cut rather than angled; this will help prevent the branch from splitting.

Finally, apply pressure to the handle and saw through the branch.

How Do You Use a Telescopic Tree Pruner And Saw?

When it comes to trimming trees, a telescopic tree pruner and saw can be a great asset.

Here’s how to use them:

Step-1. Before using either tool, make sure that you are wearing the proper safety gear, including gloves, goggles and ear protection.

Step-2. To use the telescopic tree pruner, extend the pole to the desired length and lock it into place. Then, position the cutting head at the branch you want to cut and squeeze the trigger to activate the blade. For best results, make sure to keep the blade sharp.

Step-3. To use the telescopic saw, extend the pole to the desired length and lock it into place. Then, position the blade at the branch you want to cut and start sawing back-and-forth until through.

As with the pruner, for best results keep your blade sharp. With these tips in mind, you’ll be able to quickly and easily trim any branches necessary – no ladder required!

How Do You Use a Pole Tree Trimmer?

Pole tree trimmers are an important tool for any gardener or landscaper. They allow you to reach high branches and leaves without having to use a ladder, and they also help you keep your trees healthy by trimming away dead or damaged growth.

Here’s how to use a pole tree trimmer:

1. Start by selecting the right trimmer head for the job. If you’re just doing some light pruning, a saw blade attachment will do the trick. For heavier cutting, however, you’ll need a power head with either a reciprocating saw blade or circular saw blade.

2. Once you’ve got the right attachment, extend the pole to its full length and lock it into place.

3. Now it’s time to start trimming! Begin at the bottom of the tree and work your way up, making sure to cut away any dead or diseased growth first. When trimming branches, always cut at a 45-degree angle so that new growth can easily cover up the cuts.

4. Once you’re finished trimming, lower the pole and detach the trimmer head.

Fiskars Tree Pruner Manual

Fiskars is a leading manufacturer of tree pruners, and their manual model is one of the best on the market. This tool is designed for easy, precise cutting and features a durable steel blade that can handle even the tough branches. The comfortable grip and lightweight design make it easy to use, and the trigger lock ensures safety while in use.


Are you looking for an easy way to trim those hard-to-reach branches? If so, then you need a Fiskars Chain Drive Extendable Pole Saw. This saw is designed to make trimming branches a breeze.

It features a chain drive system that provides more power with less effort and has an extendable pole that makes it easy to reach high branches. Plus, the ergonomic handle ensures comfortable use.

Sharing Is Caring:

Hi! I'm James D. Miller, a professional pro woodworker, have 10 years of experience as a woodworker and 12 years of expertise as a saw user. I've revealed this power saw review site for you guys who have a genuine interest in power tools. Thanks for showing your affinity for the review blog. Find me on Twitter here. Happy reading.

Leave a Comment