The most common way to shorten a chainsaw chain is to simply remove one or more of the outer links. This can be done with a pair of pliers or a small file. Be sure to count the number of links you remove so that you can re-attach the chain correctly later.
You may need to adjust the tension on the chain after removing links.
Chainsaws & Tools : How to Shorten the Chain on a Chainsaw
- Measure the chain to be shortened
- Place the chainsaw on a level surface and clamp it down
- Using a chain breaker tool, remove one link from the chain for every inch that needs to be shortened
- Reassemble the chain and make sure all the links fit snugly together
- Test the chainsaw on a piece of wood to make sure it is cutting properly before using it again
How to Fix a Stretched Chainsaw Chain
If your chainsaw chain is starting to look a little stretched out, there are a few things you can do to fix it. First, you’ll want to check the tension of the chain. If it’s too loose, simply tighten the nuts on the side of the saw until it’s snug.
If the chain is too tight, however, you’ll need to remove it and adjust the bar. To do this, first loosen the bar nuts, then turn the adjustment screws until the chain is looser. Once you’ve got the perfect tension, be sure to retighten those bar nuts!
If your chainsaw chain is really stretched out and showing signs of wear, you may need to replace it entirely. Fortunately, this isn’t too difficult – simply remove the old chain (being careful not to lose any links) and thread on a new one. Make sure it’s tight before using your saw again.
Credit: electrogardentools.com
Is It Possible to Shorten a Chainsaw Chain?
Yes, it is possible to shorten a chainsaw chain. There are a few things you need to take into consideration before doing so, such as the type of saw and the size of the bar. It’s also important to have the proper tools for the job.
If you’re unsure about how to properly shorten a chainsaw chain, it’s best to consult with a professional or someone who has experience with this type of project.
Can You Remove Links from a Chainsaw Chain?
You can remove links from a chainsaw chain with a few tools. You will need a pair of pliers and a file. First, use the pliers to bend open the rivet that holds the link in place.
Then, use the file to file down the end of the rivet so that it is flush with the side of the link. Finally, use the pliers to break off the head of the rivet.
How Do You Rakers a Chainsaw Chain?
If you’re new to chainsawing, the task of sharpening the chain may seem daunting. However, with a little practice, it’s actually quite easy to do. Here’s a step-by-step guide on how to sharpen a chainsaw chain.
First, you’ll need to gather a few supplies: a sharpening file, a depth gauge tool, and either a flat file or round file (depending on the type of cutter on your chain). You’ll also need gloves and safety glasses to protect yourself while working.
Next, use the depth gauge tool to check the depth of each cutter on the chain.
The cutters should be flush with the top of the depth gauges. If they’re not, use the flat file or round file to filing them down until they are.
Once all of the cutters are properly sized, it’s time to start sharpening them.
Begin by holding the file at about a 30 degree angle to the cutter and filing in one direction only (away from you). Be sure to keep even pressure on both sides of the file as you work. After each stroke, lift the file away from the cutter before starting another stroke.
Continue until you’ve gone all around each cutter (about 5-7 strokes per side).
Finally, use a piece of fine sandpaper (about 400 grit) to remove any burrs that may have been left behind by filing. And that’s it!
Can You Fix a Stretched Chainsaw Chain?
A chainsaw chain that has been stretched will need to be replaced. You can tell if your chain is stretched if it is difficult to keep tension on, or if the teeth seem to be spaced further apart than they used to be. If you notice either of these signs, it’s time for a new chain.
Conclusion
If you’re looking to shorten a chainsaw chain, there are a few things you’ll need to do. First, find the master link. This is the link that connects the two ends of the chain together.
Once you’ve found it, use a pair of pliers to remove it. Next, use a file or grinder to remove any sharp edges from the end of the chain. Finally, reattach the master link and test out your shortened chain!
